An M12 IP69K washdown cable with a stainless steel coupling nut survives high pressure hot water, caustic foam and daily thermal cycling. D-coded or X-coded, silicone-free halogen-free jacket, built to your length and pinout.
An M12 ISOBUS Lite cable carries CAN, ECU power and ground between a tractor and the implement behind it. Smaller than a nine-pin inlet, TPU overmolded, UV and chemical resistant, built to your pinout and length.
An M12 L-code 16A cable feeds 24 V DC out to IO-Link masters, field I/O islands and AGV drives where an A-coded connector runs out of current. Five power contacts, halogen-free PUR jacket, sized to your run.
This m12 l-code power cable angles the heaviest M12 power class out the back of the drive: the L-coded 4-plus-FE insert carries 16 A at 63 V, and the 90-degree exit sits flush where a straight coupling nut would not clear the cabinet wall.
This M12 l code power cable carries 16 A at 63 V DC on five positions, or 12 A on four in the T-coded version, both per IEC 61076-2-111 and IP67 mated. 14 or 16 AWG, tamper-proof overmold, gold-plated contacts, built to your length.
This M12 push pull cat6a cable replaces the threaded coupling with a single-motion latch per IEC 61076-2-010 while keeping X-coded Cat6A performance. IP67, S/FTP 26 AWG, halogen-free PUR. Plugs also seat in existing threaded X-coded sockets.
An M12 rail signal cable carries the discrete and low speed signals that make a vehicle work - door feedback, obstruction edges, brake wear, HVAC probes. A-coded or D-coded, halogen-free jacket, built to your pinout and length.
This m12 t-code power cable completes our M12 power family: the T-coded 4-pin layout carries 12 A at 60 V DC, the rating class that fieldbus power drops, DC drive feeds and PoDL powered devices specify.
This M12 x code cat6a cable carries all four pairs at 10 Gbit/s from a sealed X-coded device port to a shielded RJ45 in the cabinet. IEC 61076-2-109, Cat6A S/FTP 26 AWG, IP67 on the circular end, halogen-free PUR jacket, built to your length.
An M12 X-coded Cat6A cable to RJ45 carries 10 Gigabit Ethernet from an IP67 camera or AGV back to a standard switch port. Push-pull shell, four shielded pairs, 360 degree screen, halogen-free PUR jacket.
An M15 waterproof cable is the pole-top problem solver: a 15 mm screw-lock shell with a silicone O-ring seal, molded inline or as an F-type branch that splits one street-light feed into two or three fixtures without a junction box. IP67 when mated, IP68 class on request.
This m16 push pull quick lock cable brings tool-free DC power connection to the M16 platform: four contacts, a latched push-pull shell and a sealed mating face, so LED drivers, sensing nodes and battery packs connect in one press.
