This IP67 right angle m12 d-code cable brings a 90-degree, 4-position D-coded M12 connector to machine vision cameras, switches and other PROFINET endpoints where a straight overmold would bend the cable too sharply at the port.
This IP67 right angle m23 power cable carries a 2 plus 4 hybrid contact layout, pairing heavier power contacts with signal contacts in one sealed, 90-degree connector for servo axes, robot dress packs and outdoor feeders.
This IP67 right angle m8 sensor cable pairs a molded 90-degree male with a molded 90-degree female A-coded connector, so proximity switches, photoelectric sensors and small actuators can be wired in the tightest recesses of a machine frame.
An IP67 RJ45 panel coupler turns an enclosure wall into a sealed patch point: two 8P8C jacks sit back to back in a metal shell that clamps through the panel. Pick the cut-out, the gasket side and the mounting direction and we build the bulkhead to your drawing.
An IP67 RJ45 patch cable built for field kits that meet both kinds of port in one day. The retractable shroud slides back for a standard RJ45 jack and screws forward onto a sealed IP67 receptacle, so one jumper covers the whole site. Foil screened, outdoor jacket, tethered dust cap.
An IP67 RJ45 bulkhead cable carries an RJ45 port through an enclosure wall and seals the opening to IP67. The socket clamps to the panel with a threaded coupling nut and silicone gasket, and ships with a dust cap so the opening stays sealed when nothing is plugged in.
This extend waterproof cable takes a USB drop out to an outdoor panel, marine charger or wash-down enclosure as a molded USB-A male to USB-A female lead. O-ring sealed to IP67 when mated, carrying USB 2.0 data and 5 V power in 0.5 m to 5 m or OEM length.
A waterproof dc extension cable with a sealed threaded 5.5x2.1mm coupler and compression gasket, built for outdoor CCTV, LED signage and solar boxes. 18 AWG on 2 m and 3 m builds, 16 AWG on the 5 m build, with a UV resistant jacket.
An IP67 waterproof M12 molded cable built to the coding, pin count, jacket and length your machine needs. One overmolded assembly from connector face to cable exit — send the pinout and we build to it.
A waterproof usb-c screw cable that keeps USB 3.2 Gen 2x2 20 Gb/s signaling intact while sealing the interface against water and dust. Threaded coupling ring or dual-screw retention, plug-to-plug or plug-to-panel receptacle, built for outdoor enclosures and vehicle service ports.
An IP68 feedthrough cable for decks and bulkheads: RJ45 pass-through on a threaded gland with a tethered protective cap, air-leak screened on every unit.
An IP68 industrial data cable that carries serial, USB and Ethernet in one sealed lead, with a gasketed panel feedthrough and a dust cap for the state the port is in most of the time.
