A 10BASE-T1L patch cord for single pair Ethernet field trunks, carrying 10 Mbit/s up to 1000 m on one pair with optional power over the data line. T1 Industrial or M8 ends, IP20 or IP67, built to your length and pinout.
A 10BASE-T1L screw lock cable carries single pair Ethernet and power over the same two wires to a field device, with a threaded or bayonet metal coupling that holds on vibrating skids. Sealed M8 or IEC 63171-6, 1 to 20 m.
A cigarette lighter power cable takes 12 V or 24 V from a vehicle socket to a sealed 5.5x2.1mm DC plug. Center positive, replaceable blade fuse in the plug, 18 or 16 AWG tinned copper, waterproof cap on the barrel.
This 7/8 power cable carries the thick 7/8-16 UN thread and 3-pin contact layout that bus power architectures rely on, delivering 13 A at 300 V through a sealed, overmolded assembly built for machine frames and mobile equipment.
This 7/8 splitter turns one trunk connection into two branch feeds: a 5-pin male enters the T-body and two 5-pin female legs exit, each overmolded and sealed so a DeviceNet or CANopen drop can power two nodes without a junction box.
A car dashboard usb hdmi cable puts an HDMI socket and a USB-A socket on one flush bracket, so a media box or a phone feeds an in-car screen. HDMI OD 5.8 mm, USB 28/24 AWG, black PVC jacket, 1 m / 2 m / 3 m.
A cat5e ftp outdoor direct burial patch cord on an LLDPE UV-resistant jacket with an overall foil shield, built for above-ground, conduit and buried runs.
A cat6 ip67 waterproof patch cord built around a push-pull locking shell and sealed boot, for the three failures that kill industrial links: broken latch, corroded contacts and vibration.
A Cat6A IP67 industrial pigtail that gets a shielded link through a cabinet wall without leaving a connector exposed: threaded sealing coupler with a tethered dust cap on one end, flying shielded RJ45 on the other. Stranded S/FTP, PoE++ capable.
A Cat6A IP69K washdown patch cord for food, dairy, brewery and pharma lines: M12 X-code on the wet end, RJ45 in the cabinet, PUR jacket, built for caustic foam and high-pressure hot rinse. Lengths 3 to 10 m.
A Cat6A M12 X-coded patch cord bridging an industrial device port and a cabinet network: 8-pin X-coded M12 at the device, shielded RJ45 at the switch. Factory terminated and tested at both ends, halogen-free PUR jacket, straight or 90-degree M12.
