A Cat6A outdoor direct-burial patch cord built for the trench: a gel-filled core so a nick in the jacket does not become a capillary, and a UV-stabilised LLDPE jacket that sits in soil and sunlight without embrittling. Optional IP68 shroud.
An M12 x-code rj45 cable that carries all four Ethernet pairs from a sealed 8-pin X-coded port on a camera or a robot wrist to a screw-lock RJ45 jack in the cabinet. 26 AWG S/FTP conductors, PUR jacket, IP67 on the circular side when mated.
This dc push pull quick lock cable pairs a waterproof latched coupling with quick, one-hand DC mating: press the shells together, the lock engages, and the sealed joint shrugs off rain, washdown splash and dust on outdoor power runs.
A dt connector pigtail harness turns a light bar, rock light or work lamp with flying leads into something you can unplug, so a damaged lamp swaps at the roadside instead of being re-spliced. 2, 3 or 4 position, 16 AWG tinned leads, sealed body.
A dual port USB panel mount puts a Type-C port and a Type-A port behind one aperture, so the console is drilled once and sealed once. 100 W delivery on the Type-C side, 5 Gbps data on the Type-A side.
This dual waterproof cable puts two sealed USB-A plugs on one lead for outdoor charge points, marine chargers and wash-down drops. Overmolded with a TPE boot and internal O-ring, sealed to IP67 when mated, USB 2.0 data plus 5 V power in 0.5 m to 3 m or OEM length.
A flush mount USB-C receptacle in a threaded M21 body, retained by a locknut instead of a plastic clip, so a dashboard takes the load rather than the bezel. 10 Gbps data, power delivery to 100 W, screw cap and gasket.
An ip65 5521 cable carries DC power from an indoor supply out to garden and landscape fixtures through sealed 5.5 x 2.1 mm connectors. Threaded collars with O-rings keep water out of the joints.
This 2pin connector cable is a sealed low-voltage DC drop with an overmolded screw-lock connector at each end and an internal O-ring seal. Two 22 AWG tinned copper conductors in PVC or PUR, built to your length for outdoor lighting, marine electronics and wash-down areas.
An IP67 D-Sub screw cable is sealed in three places at once: the mating face, the panel joint and the cable exit. Gasket or sealing frame, gland or potted rear entry, and an overmolded cordset end. Send the shell size, pin count and washdown chemistry.
A dc to usb-c cable that feeds USB-C loads straight from a 12 V or 24 V rail. Sealed 5.5x2.1mm barrel on the source side, straight USB-C plug on the load side, in 0.5 m, 2 m, 3 m and 5 m. No inverter, no adapter.
An IP67 keystone panel frame is a sealed housing with a round cut-out and a locknut that takes any standard keystone module. A damaged jack or a move from Cat6 to Cat6A is a module swap at the panel, not a new cable.
