Waterproof Archives - Page 7 of 8

Showing 73–84 of 85 results

M9 sensor cordset with 4-pin female straight locking connector

M9 Sensor Cordset for Handheld and Medical Instruments

An M9 sensor cordset is the locking connector of choice for equipment an operator holds: patient monitors, portable gas analyzers, handheld GPS and lab modules. A 9 mm thread with two to eight contacts carries 125 V and up to 4 A in a shell an M12 cannot fit into.

military-cable-mil-c-26482 connector detail

MIL-C-26482 Series I Military Cable Assembly

A military mil 26482 cable built on MIL-C-26482 Series I bayonet connectors, shell sizes 08 to 24, wired to the contact layout you specify. Gold-plated contacts, braid and foil shield, PUR or neoprene jacket.

military-cable-mil-dtl-38999 connector detail

MIL-DTL-38999 Series III Military Circular Cable Assembly

A military mil dtl cable built around MIL-DTL-38999 Series III threaded circular connectors, shell sizes 09 to 25, wired to the insert arrangement you name. Shielded bundle, PUR or FEP jacket, strain-relieved backshell boots.

NMEA 2000 Bulkhead Connector with Micro-C and OneNet Options

An NMEA 2000 bulkhead connector carries the backbone or an OneNet Ethernet run through a deck or a watertight bulkhead in one sealed 12 mm penetration. Micro-C 5-pin or 8-pin X-coded OneNet, gold-plated contacts, TPU jacket. Ratings confirmed per order.

RJ45 Push-Pull Quick-Lock Cat6a Cable, IP67

This rj45 push pull cable seals an Ethernet port the fast way: the overmolded hood carries a quick-lock latch instead of a separate cap or screw ring, so an outdoor camera or wireless bridge connects in one motion and stays IP67 sealed.

rugged-rj45-military-cable connector detail

Rugged RJ45 IP68 Military Ethernet Cable

A rugged military cable in Cat6 or Cat6A S/FTP with rugged RJ45 plugs, metal locking boots and IP68 sealing when mated to a matching receptacle. PUR drag-chain jacket, 1 m to 30 m.

Single Pair Ethernet Cable in M8 and M12 Shells for Sensor Runs

A single pair Ethernet cable runs IP over two conductors instead of four pairs, in M8 or M12 shells to IEC 63171-5 and -7. Thinner, lighter, longer reaching, and PoDL capable. Built to your length and pinout.

single-usb-a-female-car-dashboard-flush-mount-cover

single-usb-a-female-panel-mount-extension-angle-1

Single USB-A Female Car Dashboard Flush Mount Extension Cable with Waterproof Cover

A single usb a female cable on a flush panel bracket, with a flip cap over the socket so splash and dust stay out. 28 AWG data with 24 AWG power, black PVC jacket, 1 m / 2 m / 3 m. IP54 with the cap closed; cut-out 28-30 mm.

Solar MC4 Adapter Cable to XT60, Anderson, DC7909 and DC5521 Power Station Inputs

A solar mc4 adapter cable takes one MC4 panel output to XT60, Anderson, DC7909 and DC5521 power station inputs. 12 AWG trunk, branches about a foot from the joint, center positive on every barrel. Specify only the branches your fleet actually uses.

SPE Bulkhead Panel Connector for 10BASE-T1L Field Devices

An SPE bulkhead panel connector brings 10BASE-T1L single pair Ethernet and Power over Data Line into a field device box through one sealed penetration. IEC 63171-6 mating face or M8 coupling, front or rear mounting. The cut-out is smaller and the termination is faster than a four-pair Ethernet entry.

USB Type-C to M12 8-Pin Industrial Cable for Panel / Machine Vision

This USB type c m12 cable carries Type-C from a controller or service laptop to a sealed IP67 eight-position A-coded field connector. 8 x 26 AWG, TPU or oil-resistant PUR jacket. Built to your pinout; specify the band against the USB side.

Waterproof USB-C Bulkhead Cable for Panel Mount Enclosures

A waterproof USB-C bulkhead cable for a port the public can reach and the weather cannot. A sealed shell mounts through the panel, a sealed lead runs to the board inside, and a dust cap covers the unmated state. Give us the cut-out and the internal length.