Coiled Telephone Handset Cable 4P4C / 6P6C

Overview

Coiled telephone handset cable with 4P4C or 6P6C plugs on each end. The cable is supplied as a complete overmoulded assembly with a strain-relief boot at each plug and wound into a retractable coil with a 1:4 to 1:5 stretch ratio. Typical use is the curly cord between the telephone base and the handset.

Key Specifications

Construction and Materials

Four or six 26 AWG stranded tinned copper conductors, PVC jacket. The cable is wound into a retractable coil with a 1:4 to 1:5 stretch ratio. The plug ends are overmoulded with a strain-relief boot. The cable is supplied continuity and hipot tested.

Typical Applications

• Standard desk telephone curly cord between base and handset
• Replacement cable for the 4P4C or 6P6C telephone handset
• POS terminal handset cable on the NCR and IBM RealPOS
• Custom coiled telephone cord for industrial or office use

Compatibility and Fitment

Compatible with standard 4P4C and 6P6C telephone jacks on telephone bases, POS terminals and PBX key systems. Pin-out is straight-through (1-to-1, 2-to-2, etc.) by default; reverse or custom pin-out on request.

Custom Builds and Ordering

Conductor count, coil stretch ratio, length (relaxed and extended), jacket colour, label print and pin-out are configurable. Sample 7 to 10 working days, production 15 to 20 working days.

Packaging and Shipping

Each cable individually PE-bagged and packed in a brown box. 100 pcs per export carton.

Quality and Compliance

Cable assembly continuity and hipot tested. Coil tested for 50,000 stretch cycles minimum. RoHS 2.0 and REACH compliance on file. Cordage construction follows the <a href=”https://www.iec.ch” rel=”nofollow noopener” target=”_blank”>IEC 60227</a> / <a href=”https://www.iec.ch” rel=”nofollow noopener” target=”_blank”>IEC 60245</a> flexible-cord families where cited, and USB-IF specifications where a USB plug is fitted.

Related Cable Ranges

Overmolded Cable Assemblies • Screw-Lock Molded Cable • Custom Wire Harnesses