7/8″ 5-Pin T-Splitter, 1 Male to 2 Female, IP67
This 7/8 splitter turns one trunk connection into two branch feeds: a 5-pin male enters the T-body and two 5-pin female legs exit, each overmolded and sealed so a DeviceNet or CANopen drop can power two nodes without a junction box.
Overview
This 7/8 splitter turns one trunk connection into two branch feeds: a 5-pin male enters the T-body and two 5-pin female legs exit, each overmolded and sealed so a DeviceNet or CANopen drop can power two nodes without a junction box.
Splitters are what keep a fieldbus power topology tidy: instead of running a separate home-run cable to every node, one trunk connection is divided at the point of use. The T-body keeps both branch legs exits short and symmetrical, which shortens the drops to paired devices such as dual sensors, valve manifolds or twin drive cabinets.
Key Specifications
The table below lists the configuration shown in the product photo.
Construction and Materials
All three connectors are overmolded onto the splitter body in one molding cycle, so there is no open terminal cavity anywhere in the assembly. The legs are flexible circular cable sized for the 5-wire layout, and every coupling nut is knurled metal that seats positively against its mating panel or cordset.
Typical Applications
Use it wherever two 7/8-inch powered devices sit close together: paired proximity clusters on a machine frame, twin nodes on a DeviceNet trunk, NMEA 2000 backbone branches in a helm console, or two actuator packs fed from a single CANopen drop.
Compatibility and Fitment
The 7/8-16 UN thread and 5-pin arrangement match standard 7/8-inch power connectors used across DeviceNet and CANopen hardware. Verify the pin function map on your trunk and branch devices; all five conductors pass straight through from the male to both female legs.
Custom Builds and Ordering
Branch length, leg orientation and other contact counts can be produced to order. Send the node schedule and we will quote the splitter mix for your network.
Packaging and Shipping
Each splitter ships bagged with contact protection on all three connectors; bulk packs with customer labels are available.
Quality and Compliance
Continuity is verified across all pins on both branch legs before packing, and the overmold body is inspected for a complete, void-free seal. See the ODVA / DeviceNet specifications for the governing interface specification.
Related Cable Ranges
Browse the related ranges: Circular M-Series Cable Assemblies Automotive Wire Harnesses Signal and Data Cables.
| Configuration | 1 male to 2 female (T / Y splitter) |
|---|---|
| Contacts | 5-pin per connector |
| Coupling | 7/8-16 UN threaded, knurled nut |
| Ingress Rating | IP67 when mated |
| Application | DeviceNet, CANopen, sensor power splits |
| Construction | Overmolded T-body, circular legs |
