Nurse Call Button Cable 6P4C Plug

Overview

Nurse call button cable with a 6P4C (RJ14-style) plug for hospital nurse call systems. The cable is supplied as a complete overmoulded assembly with a strain-relief boot at the button end and the 6P4C plug at the head-end. Typical use is for the patient-side call button that drops into a 6P4C jack on the bed head or wall plate.

Key Specifications

Connector A	6P4C plug (RJ14-style), moulded
Connector B	Nurse call button overmould, 2-pin or 4-pin
Conductor	26 AWG stranded tinned copper
Jacket	PVC, white or grey, 4 mm OD
Length	2 m to 5 m standard; OEM on request

Construction and Materials

Two or four 26 AWG stranded tinned copper conductors, PVC jacket. The 6P4C end is a moulded plug; the button end is a custom over-mould with the customer’s button PCB or a flying lead to the button. The cable is supplied continuity and hipot tested.

Typical Applications

Hospital bed-side nurse call button
Patient pendant call button on hospital bed head
Replacement cable for legacy 6P4C nurse call systems
Custom nurse call drop in assisted living facility

Compatibility and Fitment

Compatible with the 6P4C (RJ14-style) nurse call jack common on hospital bed heads and wall plates. Pin-out depends on the nurse call system – provide the bed head or wall plate make and model at order. The cable is a passive assembly and is not a medical device; the connected call button and host system carry the regulatory clearance.

Custom Builds and Ordering

Pin count, length, jacket colour, label print and button over-mould are configurable. New button overmoulds carry a mould fee. Sample 7 to 10 working days, production 15 to 20 working days.

Packaging and Shipping

Each cable individually PE-bagged and packed in a brown box. 100 pcs per export carton.

Quality and Compliance

Cable assembly continuity and hipot tested. Jacket built to UL 758 style 2464 or equivalent. RoHS 2.0 and REACH compliance on file. The cable is a passive assembly and is not a medical device; final regulatory clearance rests with the connected host system. Ingress protection is rated per <a href=”https://www.iec.ch” rel=”nofollow noopener” target=”_blank”>IEC 60529</a>; the IP code quoted for each build is the rating the moulded assembly is built to, verified on the mating pair.