A 3 5mm trrs right angle cable with a 4-pole plug carrying stereo audio plus mic, and a 90 degree head for tight panels. CTIA or OMTP wiring, far end stripped, socketed or per your drawing.
A 6 35mm trs audio cable with a 90 degree right-angle plug for instruments, mixers and rack gear in tight spaces. Balanced mono, unbalanced stereo or insert wiring, far end stripped, TRS, TS or XLR to your drawing.
A car USB-C data cable with a 90 degree molded plug that keeps the lead flat against the console or trim. Wired for data as well as power, TPE jacket for the temperature swing inside a vehicle, with a coiled option so the lead retracts.
A coiled inch guitar cable with a straight TS plug at one end and a right-angle TS plug at the other, so slack never lies on the floor. Foil shield against handling noise, black PU / PVC coil, resting and stretched lengths to your stage.
This dc 4017 right angle cable has a 4.0 x 1.7 mm coaxial barrel plug molded in an L-shaped body, keeping the lead flush against the device chassis in tight spots.
Far end is built to your spec: bare tinned leads, DC plug or terminals.
This dc 4017 combo cable has a straight 4.0 x 1.7 mm male plug on one end and a right-angle female socket on the other, so a straight PSU lead can enter a tight chassis.
No kinking at the jack, no side load on the solder fillet.
A dc 5521 straight adapter cable puts a right-angle 5.5 x 2.1 mm plug on one end and a straight female socket on the other, so power leads can run flush against panels instead of kinking.
This IP67 right angle m12 d-code cable brings a 90-degree, 4-position D-coded M12 connector to machine vision cameras, switches and other PROFINET endpoints where a straight overmold would bend the cable too sharply at the port.
This IP67 right angle m23 power cable carries a 2 plus 4 hybrid contact layout, pairing heavier power contacts with signal contacts in one sealed, 90-degree connector for servo axes, robot dress packs and outdoor feeders.
This IP67 right angle m8 sensor cable pairs a molded 90-degree male with a molded 90-degree female A-coded connector, so proximity switches, photoelectric sensors and small actuators can be wired in the tightest recesses of a machine frame.
