Cat6 CMP Plenum-Rated Patch Cord

Cat6 CMP Plenum-Rated Patch Cord (550 MHz, 23 AWG Solid, NFPA 262, FT6)

CMP / FT6 plenum-rated Cat6 UTP patch cord with 23 AWG solid bare copper, 550 MHz, T568B, 50 micro-inch gold RJ45. Approved for use in air-handling spaces – above drop ceilings, below raised floors and inside HVAC ducts – where NFPA 70 / NFPA 262 CMP-rated cable is required.

Overview

Key Features

4-pair 100 Ohm twisted-pair construction, ETL/UL / standards verified
50 micro-inch gold-plated RJ45 8P8C contacts for low insertion loss
Snagless molded boot protects the latch and eases high-density patching
100% bare-copper conductor (no CCA) – PoE / PoE+ / PoE++ safe
Custom lengths, colours and branding available on request

Typical Applications

Data-centre and server-room patching
Office LAN, workstation, VoIP and Wi-Fi AP drops
Structured-cabling patch-panel to switch links
IP cameras, access control and building-automation links

Specifications

Cable Type	Cat6 UTP
Plenum Rating	CMP / FT6 (NFPA 262)
Conductor	23 AWG Solid Bare Copper
Bandwidth	550 MHz
Wiring	T568B
Connector	RJ45 Long-Body Male, 50 uin Gold-Plated
Jacket	Plenum PVC (Low-Smoke)
Cable Diameter	6.0 mm
Operating Temperature	-10 °C to +75 °C
Compliance	c(UL)us, TIA/EIA-568-C.2, ISO/IEC 11801, NFPA 262

Packaging

1 piece per PE bag; 50 / 100 pieces per export carton
Custom retail box, label and bar-code available

Notes

All specifications are typical values unless otherwise stated and subject to change without notice.
For PoE++ Type 3 / Type 4 (60 W / 90 W) deployment, ensure bundle size and ambient temperature follow TIA TSB-184-A guidelines.
Storage temperature: -20 °C to +70 °C. Do not install below -10 °C jacket rating.