Built to order · 47 assemblies

Signal and Data Cable Assemblies

Data and signal leads for machine vision, robotics and industrial serial links, including locking USB3 Vision camera cords, USB4 active optical assemblies and torsion-resistant robot cabling. Shielding, jacket and connector orientation are set per order.

Interface
USB-C · USB4 · USB3 Vision
Protocol
RS-485 · CAN · 10GBASE-T
Shielding
Foil + braid · copper/fiber hybrid
Jacket
PVC · PUR · TPE
Motion
Static · continuous flex · torsion
Sealing
IP65 – IP68 on request
Length
0.3 m – 30 m
Build
Overmolded · cleanroom-rated

Showing 61–63 of 63 results

Verifone Vx680 14-Pin to RJ45 Coiled Ethernet Cable

This verifone vx680 coil cable links the 14-pin docking header on the Vx680 base to a standard RJ45 Ethernet drop, in Cat5e SF/UTP with a retractable PUR coil at 1:5 stretch. Built to your relaxed and extended length for counter and cart-mounted payment terminals.

Waterproof USB-C Bulkhead Cable for Panel Mount Enclosures

A waterproof USB-C bulkhead cable for a port the public can reach and the weather cannot. A sealed shell mounts through the panel, a sealed lead runs to the board inside, and a dust cap covers the unmated state. Give us the cut-out and the internal length.

Zebra / Symbol Scanner Cable, USB, RS-232 or PS/2

A Zebra Symbol scanner cable built to your model and host interface: USB, RS-232 or PS/2, at the length and jacket your fleet runs.

Specification table

This category exists because most projects start from a host port rather than a cable: the connector is decided by the equipment, and the build has to meet the signal requirement around it. Tell us the interface, the reach and what the cable moves through, and we specify conductor, shields and pitch from there.

Typical signal and data cable build options. Every assembly is made to order, so values outside this table are quoted rather than declined.
ParameterStandard buildAvailable on request
InterfaceUSB-C, USB4, USB3 Vision, Micro-B, RJ45Mixed ends, panel-mount versions, legacy DIN
ProtocolRS-485 / RS-422 Modbus RTU, CAN10GBASE-T, Camera Link HS style builds
Data rate480 Mbit to 20 Gbit depending on the interfaceFull-rate verification on request
Conductor22-28 AWG stranded copperSilver-plated copper, fine-strand high-flex classes
ShieldingFoil plus braid over the signal pairsIndividual pair shields plus overall screen
Flex classStatic routingContinuous flex, torsion, cleanroom-rated constructions
JacketPVC (indoor), PUR (oil and coolant)TPE, halogen-free, low-outgas cleanroom grades
SealingIP65 to IP68 mated with the right hardwareIP69K where the run is washed down
Length0.3 m to 30 mLonger runs quoted against the interface loss budget
BuildOvermolded strain relief on both endsBackshells, potting, labeled harness branches

USB builds follow the USB4 and USB specification set published by the USB Implementers Forum; vision interfaces are specified against the AIA vision standards and, for camera-side behavior, EMVA guidance.

Typical applications

  1. Machine vision USB3 Vision and GigE Vision leads that hold lock even when the cable flexes with a moving camera.
  2. Motion control Encoder and feedback lines kept separate from motor power to avoid encoder noise.
  3. Fieldbus runs RS-485 and CAN trunks built to the characteristic impedance the network expects.
  4. Drag chain Continuous-flex constructions with specified bend radius and cycle life.
  5. Semiconductor and cleanroom Low-outgas jackets and documented packing.
  6. Test and measurement Short-run precision leads with stated capacitance and return loss.

Related reading

Questions buyers ask

How do I choose between foil and braid shielding?

Foil gives 100 percent coverage and handles high frequency noise; braid is stronger mechanically and carries low frequency return current better. Most motion and vision builds use both. There is a case where a shield makes EMC worse, and we cover it in shielded vs unshielded cable.

What decides the usable length of a GigE Vision run?

Insertion loss across the pairs, followed by the return loss of the plug terminations. Screw-lock and high-flex constructions change the answer, so we work from the camera and switch distances rather than a fixed maximum. See GigE Vision cable selection.

Can you hold a torsion rating?

Yes for robot-mounted builds. We need the twist angle per meter and the cycle count, then select the stranding and shield construction to match instead of quoting a generic flex number.

Have one built to your drawing

Send the connector part numbers, lengths and environment. We review manufacturability in writing before any tooling spend, and we tell you up front what we cannot do.

Request a quote