Download Center
Dimension drawings and product documents you can take away with one click. Every file on this page opens as a PDF, with no sign-up and no email gate.
Most of what we build is made to a customer drawing, so the files here cover the parts that carry a public data sheet — the ones you need to check a fit against before you commit. We add to this page as standard parts are released. Browse the product range, or go straight to the contact page if you need a file that is not listed.
What is in each drawing
Every PDF carries the same information in the same order, so you can compare parts without hunting for it: the connector series and pin count on both ends, the overall length with its tolerance, the overmold or strain-relief footprint where one is used, and a pin-to-pin wiring table. Where a part is normally built to a customer drawing, the PDF shows the public version of that geometry.
Drawings are typical production values, not a contract. Confirmed tolerances are issued on the approval drawing before tooling starts, because what a part can actually hold depends on the connector series and the overmold geometry — see how a custom program runs.
Product drawings
Technical references
Short guides on the specification questions that come up in almost every enquiry — written for whoever has to write the requirement, with the pass/fail criteria of the standards named so you can check them yourself. Free to take away, and more are added as we publish them.
PDF, 6 pages, Rev. 1 · issued 14 September 2026. Covers UL 1581 VW-1, FT1/FT2, UL 444 CM/CMG/CMR/CMP, IEC 60332-1-2 and -3, EN 50575 (CPR), and UL 94 V-0/V-1/V-2, 5VA/5VB.
Need a file you do not see here?
Most of what we build is made to a customer drawing, so only part of the range carries a public data sheet. Tell us the connector series, pin count, cable length, current load and operating environment, and we will send back a dimensioned PDF, a step file or a panel cut-out template — usually the same working day. Request a drawing.
Downloads: FAQ
Are these the final production dimensions?
They are typical production values, which is what you need to check a fit. Confirmed tolerances are issued on the approval drawing before tooling starts, because the tolerance a part can hold depends on the connector series and the overmold geometry.
Can I get a STEP file or a 3D model?
Yes. Ask for the part number and we will send a STEP file where one exists, or build one for the assembly you are specifying. Panel cut-out templates are available the same way.
The part I need is not listed here.
Send the connector series, pin count, cable length, current load and operating environment, and we will return a dimensioned PDF — usually the same working day. Request a drawing.
Do I need an account to download?
No. Every file on this page opens directly in your browser, with no sign-up and no email gate.
Dimensions in these drawings are typical production values. Tolerances are confirmed on the approval drawing before tooling starts.
